Aladdin Flow controller

Options

505837 Features

• Vary the pumping rate in proportion to a variable voltage input -- start or stop the pump at predefined voltages
• Control the pumping rate to maintain a voltage window (ie. - maintain a pressure or pH level)
• Compatible with the AL-1000 syringe pump via an RS-232 interface
  • Interface your pressure sensors, PLCs, sensors, joysticks, and more with the Aladdin Analog Sensor Interface to your AL-1000 pump
• No computer required-- operates stand alone
• Optional: output event data to a computer for logging
• Over 10 modes of operation
• Trigger program events according to voltage
• No complicated user interface

505838 Features

The upgraded version of Aladdin Flow Control v1 adds the following features:

• Dual Pump Control: Operates 2 pumps as a system:
  • Simultaneous Dual Pump Mode: 2 pumps operate at the same flow rate and direction
  • Inverted Gradient Constant Flow Rate Mode: 2 pumps inversely varying flow rates combine to a constant flow rate
  • Alternating Pump Mode:
    • Continuous Infusion: One pump infuses while other pump refills. Then pumps switch.
    • Alternate Infusion of 2 Fluids. Automatically switches between pumps
• Hysteresis Mode
• Digital Sensor Interface
• RS-232 Serial Command Interface: Send commands, query data, remote control, network with pumps.
• Local Setup Option: Store operational parameters directly on the interface instead of pump

Inverted Gradient Constant Flow Rate Mode

Ramping (gradient) with Voltage

Automatically adjusts the pumping rate proportionally to the voltage.

Pressure Controlled Infusion

Automatically varies the pumping rate to maintain a pressure by utilizing your pressure sensor with a voltage output.

Start/stop pump at a voltage trigger

Start/stop pump within a voltage range